Universal Steering Wheel Control Interface installation Manual

0

Filed Under (Tips and Review) by admin on 31-10-2010

download
Wiring Connections Step 1. Connect the BLACK wire to ground (-). Verification: Wire or location registers a constant (-) when probed. Step 2. Connect the RED wire to switched +12V. Verification: Wire registers +12V when the ignition key is turned to the ACC or ON posi- tions. Step 3. Connect the appropriate interface wire (WHITE, YELLOW, ORANGE or GREEN).  Refer to the Identification and Connection Chart . Locate the vehicle and note the SWC wire color in the “Interface Wire Color” column.  Note the vehicle wire color and location information in the “Identification” column. Note: You will only connect ONE of these wires. The other 3 wires will not be used. Cut and insulate the unused wires.  Connect the wire as indicated in the chart.