stereo antennas for 2017 road glides

You search Auto repair manual PDF stereo antennas for 2017 road glides, if there are search results will appear below. If search results do not exist, please search by others keyword.



  stereo antennas for 2017 road glides Direct Download speed 5282 Kb/s

  stereo antennas for 2017 road glides Full Version speed 6162 Kb/s



HARLEY DAVIDSON ROAD KING SOLO BUCKET AND PASSENGER PILLION INSTALLATION INSTRUCTIONS

0

Filed Under (Harley Davidson) by admin on 10-02-2011

download
Installation SOLO SADDLE ONLY 1. Remove stock seat and grabstrap according to applicable Service Manual instructions. 2. Road King standard models . Remove and save the stock screws and seat mount bracket at the back of the rider solo seat. 2000 and later models . Remove the retainer washer from the stud plate and replace with two black retainer washers (2). Be careful not to allow stud plate to fall through the fender. 3. Road King standard models . Install stock solo seat mount bracket using two stock screws saved in Step 2. Road King Classic Custom models . Install solo seat mount bracket onto back of solo seat using bracket and screws included in Mount Kit Number 52903-01. 4. Install seat by sliding front of seat into seat holder bracket. Pull up on the nose of the seat to verify that the seat is securely installed. After installing seat, pull upward on front of seat to be sure it is in locked position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070a) 5. 1999 and later models . Install 1/4 in. star washers (6), spacers (4) and acorn nuts (3) onto rear mount studs. Torque to 72 in-lbs (8.13 Nm). 1998 and earlier models . Install 5/16 in. star washers (5) and 5/16-18 x 3/4 in. buttonhead screws (1) into stock mount nuts. Torque to 17 ft-lbs (23 Nm). SOLOAND PILLION 1. Remove stock seat and grabstrap according to applicable Service Manual instructions. Retain all hardware for later use. 2. Road King standard models . Remove and save the stock screws and seat mount bracket at the back of the rider seat. 3. Road King standard models. Install stock seat mount bracket onto new solo seat using two screws saved in Step 2. Road King Classic Custom models. Install solo seat mount bracket onto back of solo seat using bracket and screws included in Mount Kit Number 52903-01. 4. 1999 and later Road King standard models . Secure the rear mount bracket with stock mushroom nuts (10) and two 1/4 in. star washers (6). Torque to 72 in-lbs (8.13 Nm). 1998 and earlier Road King standard models . Install solo seat by sliding front of seat into holder bracket on bike. Secure the rear mount bracket with the two mushroom screws (11) and two 5/16 in. star washers (5). Torque to 17 ft-lbs (23 Nm). Road King Classic Custom models . Mount Kit Number 52903-01 is required for installation. Install solo seat (7) by sliding front of seat into holder bracket on bike. • 1999 and later models . Using Mount Kit Number 52903-01, secure the rear mount bracket with the two mushroom nuts (10) and two 1/4 in. star washers (6). Torque to 72 in-lbs (8.13 Nm). • 1998 and earlier models . Using Mount Kit Number 52903-01, secure the rear mount bracket with the two mushroom screws (11) and two 5/16 in. star washers (5). Torque to 17 ft-lbs (23 Nm)

Incoming search terms:

Harley Davidson FL series Electra Glide, Ultra Classic, Road King, Road Glide Left and Right Mounting Plate Installation Installation Manual

0

Filed Under (Harley Davidson) by admin on 25-02-2012

download
Remove existing control arm end cap and grind the outside flush. See picture below for reference. The swing arm will drop if both sides are removed at the same time. To ease installation, complete one side before starting on the other. Note: there is a left and right. Left and right end caps shown. 2. Install mounting plate assembly 10002351 on top of the end cap using 7/16″ hex head bolt and lock washer in the bottom hole. Use the 7/16″ counter sink bolt in the top hole. Make sure the end cap is seated properly. The end cap notch should fit into the recess on the frame. The pivot arm assembly is shipped on mounting plate assembly; you may remove the pivot arm to make installation easier. 3. Snug up the bolts evenly, make sure the end caps are not crooked in relation to the frame. Tighten both bolts to 25 ft lbs. (Further tightening will be required after the toe in is set). 4. If you removed the left hand pivot arm assembly, remount it now, 10002575-A (pg 20) with seal, bearings (2), washer, nut, cotter pin and dust cover. 5. Repeat for right hand side. 5 Toe In Adjustment Adjustment made with the mounting plates, bolts, pivot arms, and hubs (without wheels and tires) in place

Harley Davidson Dakota Digital HLY-6000 Road Star Installation Instructions

0

Filed Under (Harley Davidson) by admin on 31-10-2010

download
The Road Star wiring is split into 2 different bundles with black connectors on the ends that were used to plug into the stock gauge cluster. Cut off both connectors. They are no longer needed The speed sensor wires on the HLY-6000 have a connector on the end that allows you to plug it directly into Harley Davidson speed sensors by using an appropriate adapter (sold separately). Luckily for us, the Road Star’s stock speed sensor will work just fine without an adapter so go ahead and cut off that connector, you don’t need it.
Ideally, the best location for the “brain box” unit of the HLY-6000 would be under the left side cover. Unfortunately, mine is full of other stuff so I had to improvise the location and decided to mount it to the back portion of the under-seat area. I would recommend that you mount yours under the left side cover though. The wires are the perfect length for that location. The brain box and wires could fit under the right side cover, but I don’t believe that the main gauge connector would reach. Using the wiring scheme on the last page of this guide, match up the wires on the Road Star with the corresponding wires on the HLY-6000 wiring harness and solder them together. Important Wiring Information: Both BLACK wires on the brain box need to be connected directly to the (-) terminal on the battery. Don’t connect them to anything else. The following wires from the Road Star are not used and can be taped off: • BLACK • RED / GREEN • BROWN The following wires from the HLY-6000 are not used and can be taped off: • GRAY • WHITE/ BLUE • WHITE (on main harness) • BROWN (*optional) The HLY-6000 has a “dimmer” function which is controlled by the BROWN wire. If you want the gauge to be bright all the time, then leave this wire disconnected. If you want the gauge to dim for night driving, then connect this wire to the GREEN Low Beam (+12v) wire

HARLEY DAVIDSON HALF HELMET STEREO HEADSET KIT/ AUDIO CABLE CONNECTION OPERATION MANUAL

0

Filed Under (Harley Davidson) by admin on 20-04-2011

download
AUDIO CABLE CONNECTION 1. See Figure 3. Obtain the larger clip (4) and the coiled headset audio cable (2) from the kit. Install the 3.5 mm stereo jack end of the cable into the clip. 2. Connect the 3.5 mm stereo jack from the headset audio cable to the audio output socket on the Road Tech riser radio, satellite radio or other audio device. Position the clip in the area indicated in Figure 1, and rotate as needed to allow easy insertion and removal of the cable jack and audio output socket. 2 1 is04347 1. For FLHT models 2. For FXD, FXST, FLST, FLHR and FLTR models Figure 1. Clip Location NOTE Ambient temperature should be at least 60 °F (16 °C) for proper adhesion of the clip to the mounting surface. 3. Clean the clip mounting area with a mixture of 50 to 70% isopropyl alcohol and 30 to 50% distilled water. Allow to dry thoroughly. 4. Peel the liner from the adhesive backing of the clip. Carefully position the clip to the mounting surface, and press firmly into place. Hold the clip in position with steady pressure for 30 seconds. Be sure that steering is smooth and free without interference. Interference with steering could result in loss of vehicle control and death or serious injury. (00371a) •Be sure audio connection harness or headset audio cable do not pinch, bind or interfere when handlebars are turned fully to left or right fork stops. 5. See Figure 3. Use the small clip (5) from the kit to retain any excess headset cable to the side of the console. Attach per Step 4. NOTES Allow AT LEAST 24 hours after applying the clip before exposing the area to vigorous washing, strong water spray or extreme weather. -J04930 1 of 2 PERATION 1. Plug in the coiled audio cable at the headset and audio source. 2. See Figure 2. Put the headset on as shown, with the headband across the back of the head, above the neck. Put the helmet on, and fasten securely

KAWASAKI ZX-10R ROAD TEST And SPECIFICATIONS

0

Filed Under (Kawasaki) by admin on 05-11-2010

download
In the past the name Kawasaki, for me, always suggested legendary fast superbikes with brut power. Then later came the Ninja name tag and there was still a lot of speed there, but amongst the strength of some superb opposition the legend was waning. Well now the legend is back, the new 2008 Ninja ZX-10R brings back all that attitude, styling and raw power of a true superbike. As per my usual form [running a bit late] I picked up the ‘Kwacker’ from D ‘n’ D Motorcycles in Conlig all in a bit of rush. Fortunately for me, Davy the owner was as obliging as ever and kindly let me take the bike straight to the Cookstown 100 road race practice. On arrival, it was out of the van, a quick once over, tyre pressures checked and straight onto the grid to instruct the newcomers’ practice sessions. Luckily, with all the rush, I hadn’t time to dwell on the reputation of the previous models, but after one cautious lap in damp conditions the ZX-10R felt right at home among the racers. First thing I noticed, and appreciated in this situation, was that it steered really well. Turn-in and direction changes felt light and easy with no signs of the questionable high speed stability of previous ZX-10s. Suspension was slightly hard compared to some road bikes, but any softer and we would have been wallowing out of the dips. The front and rear suspension soaked up the bumpy country roads well, with the only adjustment made, being a click harder on the front rebound damping. After a few laps I really did forget I was on a road bike, such was my confidence in the big ‘Kwacker’. Talking high tech features, the ZX-10R apparently has some form of traction control system – (Kawasaki Ignition Management System) KIMS. Bit of a girly name eh! Now I’m not sure exactly how it works on this particular bike, but I can testify to an enormous amount of grip and only

TOYOTA ALL MODELS AM STATIC NOISE ON VEHICLES WITH POWER ANTENNAS

0

Filed Under (Toyota Manuals) by admin on 16-10-2011

download
Vehicles with power antennas may exhibit audible electrical noise on weak AM stations when various electrical accessories (turn signals, rear defogger, cruise control, brakes, etc.) are operated. Poor antenna grounding can cause this condition. To eliminate or reduce the intensity of the noise, use the following repair procedure: AM STATIC NOISE ON VEHICLES WITH POWER ANTENNAS Page 1 of 2 OCTOBER 25, 1996 AUDIO AU002-96 ALL MODELS REPAIR PROCEDURE: 1. Tune the radio to a strong, static-free AM station and slowly move the tip of the antenna
mast forward and back approximately 2 inches (Fig. 1). If static noise is not heard, go to Step 2. If static noise is heard during antenna movement, replace the antenna mast and go to Step 3. NOTE: Do not touch the antenna mast with your bare hands. Use a glove or nonmetallic object to move the antenna. (If you touch the antenna with your hands, you will change the antenna sensitivity). 2. Remove the antenna mast and inspect the base of the mast for corrosion and damage (Fig. 2). Clean with 1500 grit sandpaper. 3. Remove the antenna assembly and inspect the inner fender around the antenna hole for corrosion (Fig. 3). Clean with 1500 grit sandpaper.

Yamaha Road Star EZ-Steer Installation Manual

0

Filed Under (Yamaha) by admin on 17-02-2011

download
Champion Yamaha Road Star EZ-Steer Installation of the Champion EZ-Steer system is similar to the installation of the OEM triple clamp of your Yamaha Road Star Motorcycle. Much of the OEM hardware is retained and reused. It is assumed that the installer has advanced and/or professional skills in motorcycle servicing. We recommend that you use an OEM service manual and follow the prescribed disassembly, installation and torque specifications for the upper and lower clamp assembly. Recommended Procedures • Remove headlight, windscreen (if so equipped) and brackets from motorcycle. • The wheel and fork assembly can be removed as one complete unit. Disconnect the master cylinder brake line from the tee fitting below the lower triple clamp. The caliper brake lines may be left in place on the tee fitting. • Install supplied extensions to fork tubes the supplied o-rings. Apply lubricant to o-rings and extensions prior to installing to fork tubes. • Install the lower fork tube covers to the lower clamp prior to installation to motorcycle using the longer screws supplied. The two longest screws are used in the outboard holes. • Replacing the upper OEM bearing and race with the Champion supplied bearing and race, install Champion lower triple clamp to motorcycle reusing original hardware as removed. Torque bearing lock nut to 30 lb. ft. • Slide fork tubes up through bottom of lower clamp approximately 6-8 inches. Install the OEM gaskets, washers and upper fork tube covers. Do not reinstall brake line holders at this time. • Install Champion upper clamp with OEM washer and dome nut. Leave loose. • Slide forks up and into the upper clamp until top of extension is flush with top surface of clamp. • Torque dome nut to 85 lb. ft. • Ensure that fork tube extensions are flush with top of upper clamp. Torque upper and lower clamp bolts to 35lb. ft. • Install handle bars to upper clamp using OEM bolt with supplied flat washers. One washer on top, two on bottom, both sides. • Reinstall brake line holders to the bottom of the lower triple clamp using the supplied M6 NyLoc nuts. • Reinstall all other OEM parts as removed. • Bleed brakes. EZ-Steer Maintenance

2000 Harley-Davidson FLHRCI Road King Classic

0

Filed Under (Harley Davidson) by admin on 03-11-2010

download
the Road King® Classic is a motorcycle with enough traditional styling to drop jaws throughout the continent. The Road King® Classic boasts laced wheels, fat white-walls and gorgeous leather saddlebags with hard inserts so they keep their shape across the long miles. Slightly narrower new handlebars provide improved ergonomics. Fender tips, tank and seat valance all boast a metal emblem. The model is available with a fuel-injected, chrome-and-black Harley- Davidson® Twin Cam 88 engine. Specifications: Engine Type: 1449 cc, 4-Stroke, Air Cooled, V-Twin Engine Bore and Stroke: 95.3 mm x 101.6 mm Valves 2 valves/cylinder Claimed Horsepower: 67 hp (50 kW) @ 5200 rpm Maximum Torque: 110 Nm (81.1 ft. lbs) @ 3100 rpm Transmission type: 5 speed Final Drive: Belt Tire – Front: 130/90-16 Tire – Rear: 130/90-16 Brakes – Front: dual 292 mm discs with 4-piston calipers Brakes – Rear: single 292 mm disc with 4-piston calipers

Honda CT 110 OWNER’S MANUAL

0

Filed Under (Honda) by admin on 24-04-2011

download
Additional On-Road Gear In addition to a helmet and eye protection, we also recommend: 0 Sturdy boots with non-slip soles to help protect your feet and ankles. 0 Leather gloves to keep your hands warm and help prevent blisters, cuts, burns and bruises. 0 A motorcycle riding suit or jacket for comfort as well as protection. Bright- coloured and  reflective clothing can help make you more noticeable in traffic. Be sure to avoid loose clothes that could get caught on any part of your motorcycle. 4 Additional Off-Road Gear On-road apparel may also be suitable for casual off-road riding. But if you plan on any serious off-road riding you will need more serious off-road gear. In addition to your helmet and eye protection, we recommend off-road motorcycle boots and gloves, riding pants with knee and hip pads, a jersey with elbow pads, and a chest/ shoulder protector. This motorcycle has been designed as a rider-only motorcycle. It is not designed to carry a passenger. A passenger could interfere with your ability to move around to maintain your balance and control of the motorcycle. In addition, exceeding the weight limits or carrying an  unbalanced load can seriously affect your motorcycle’s handling, braking, a11d stability. Adding accessories or making
modifications that change this motorcycle’s design and performance can also make it unsafe. Also, the weight of any  accessories will reduce the maximum load the motorcycle can carry. The following pages give more specific information on loading, accessories and modifications. Loading How much weight you put on your motorcycle, and how you load it, are important to your safety. If you decide to carry cargo, you should be aware of the following information. Overloading or improper loading can cause a crash and you can be seriously hurt or killed. Follow all load limits and other loading guidelines in this manual

Kawasaki KZ 900/ KZ 1000 Piston Kits Installation Manual

0

Filed Under (Kawasaki) by admin on 25-10-2010

download
075CC 72MM KZ 900: Resleeving and bore crankcase ROAD 10.5:1 MTC-K1075 KZ 1000: 2mm oversize 2.834 In KZ 1000: Cylinder boring DRAG 12.5:1 MTC-K1075H TURBO 9.0:1 MTC-K1075T 1135CC 74MM Resleeving and bore crankcase ROAD 10.5:1 MTC-K1135 KZ 1000: 4mm oversize 2.913 In DRAG 12.5:1 MTC-K1135H TURBO 7.8:1 MTC-K1135T 1197CC 76MM Resleeving and bore crankcase ROAD 10.5:1 MTC-K1197 KZ 1000: 6 mm oversize 2.992 In DRAG 12.5:1 MTC-K1197H TURBO 7.8:1 MTC-K1197T 1261CC 78MM Resleeving and bore crankcase ROAD 10.5:1 MTC-K1261 KZ 1000: 8mm oversize 3.070 In DRAG 12.5:1 MTC-K1261H TURBO 7.8:1 MTC-K1261T 1327CC 80MM Big block required bore crankcase ROAD 10.5:1 MTC-K1327 KZ 1000: 10mm oversize 3.149 In DRAG 13.5:1 MTC-K1327H TURBO 7.8:1 MTC-K1327T 1428CC 83MM Big block required bore crankcase ROAD 10.5:1 MTC-K1428 KZ 1000: 13mm oversize 3.267 In DRAG 13.5:1 MTC-K1428H TURBO 7.8:1 MTC-K1428T 1500CC 85MM Big block required bore crankcase DRAG 13.5:1 MTC-K1500H KZ 1000: 15mm oversize 3.346 In TURBO 7.8:1 MTC-K1500T

Incoming search terms:

Incoming search terms: