content

You search Auto repair manual PDF content, if there are search results will appear below. If search results do not exist, please search by others keyword.



  content Direct Download speed 5282 Kb/s

  content Full Version speed 6162 Kb/s



1999-2002 SUZUKI SV 650 OWNER'S MANUAL

0

Filed Under (Suzuki) by admin on 26-02-2011

download
FUEL, ENGINE OIL AND COOLANT RECOMMENDATION FUEL Your motorcycle requires regular unleaded gasoline with a minimum pump octane rating of 87 ((R+M)/2 method) . In some areas,the only fuels that are available are oxygenated fuels. Oxygenated fuels which meet the minimum octane requirement and the requirements described below may be used in your motorcycle without jeopardizing the New Vehicle Limited Warranty or the Emission Control System War- ranty. NOTE: Oxygenated fuels are fuels which contain oxygen-carrying additives such as MTBE or alcohol. Gasoline Containing MTBE Unleaded gasoline containing MTBE (Methyl Tertiary Butyl Ether) may be used in your motorcycle if the MTBE content is not greater than 15%. This oxygenated fuel does not contain alcohol. Gasoline/Ethanol Blends Blends of unleaded gasoline and ethanol (grain alcohol), also known as GASOHOL, may be used in your vehicle if the ethanol content is not greater than 10%. Gasoline/Methanol Blends Fuels containing 5% or less methanol (wood alcohol) may be suitable for use in your motorcycle if they contain co-solvents and corrosion inhibitors. DO NOT USE fuels containing more than 5% methanol under any circumstances. Fuel system damage or motorcycle performance problems resulting from the use of such fuels are not the responsibility of Suzuki and may not be covered under the New Vehicle Limited Warranty or the Emission Control System Warranty . Fuel Pump Labeling In some states, pumps that dispense oxygenated fuels are required to be labeled for the type and percentage of oxygenate, and whether important additives are present . Such labels may provide enough information for you to determine if a particular blend of fuel meets the requirements listed above. In other states, pumps may not be clearly labeled as to the content or type of oxygenate and ad- ditives . If you are not sure that the fuel you intend to use meets these requirements, check with the service station operator or the fuel suppliers

1999-2002 SUZUKI SV650 OWNER'S MANUAL

0

Filed Under (Suzuki) by admin on 12-12-2010

download
Gasoline/Ethanol Blends Blends of unleaded gasoline and ethanol (grain alcohol), also known as GASOHOL, may be used in your vehicle if the ethanol content is not greater than 10%. Gasoline/Methanol Blends Fuels containing 5% or less methanol (wood alcohol) may be suitable for use in your motorcycle if they contain co-solvents and corrosion inhibitors. DO NOT USE fuels containing more than 5% methanol under any circumstances. Fuel system damage or motorcycle performance problems resulting from the use of such fuels are not the responsibility of Suzuki and may not be covered under the New Vehicle Limited Warranty or the Emission Control System Warranty . Fuel Pump Labeling In some states, pumps that dispense oxygenated fuels are required to be labeled for the type and percentage of oxygenate, and whether important additives are present . Such labels may provide enough information for you to determine if a particular blend of fuel meets the requirements listed above. In other states, pumps may not be clearly labeled as to the content or type of oxygenate and ad- ditives . If you are not sure that the fuel you intend to use meets these requirements, check with the service station operator or the fuel suppliers. d of. ; NOTE: • * To help clean the air, Suzuki recommends that you use the oxygenated fuels . • * Be sure that any oxygenated fuel you use has octane ratings of at least 87 pump octane ((R+M)/2 method) . • * If you are not satisfied with the driveablity or fuel economy of your motorcycle when you are using an oxygenated fuel, you should switch back to regular unleaded gasoline . • * If engine pinging is experienced, substitute another brand as there are differences between brands . A CAUTION Spilled gasoline containing alcohol can harm your motorcycle. Alcohol can damage painted surfaces. Be careful not to spill any fluid when filling the fue

DUCATI 999R NITRO POWERED R/ C MOTORBIKE INSTRUCTION MANUAL

0

Filed Under (Ducati) by admin on 11-11-2010

download
FUEL SELECTION 1. Choose a fuel from a reputable, brand name company that is approved for car/truck use. Do not use airplane or boat fuels in your car/truck. Choose methanol based model engine glow fuel that has a nitro content in the range 10%-30% and 5% to 18% caster/synthetic oil content for lubrication. Lower nitro percentages will generally result in a cooler engine running temperature and therefore last longer before needing a rebuild; cooler-running engines also generally produce less power. 20% nitro is the most widely used fuel. 2. Fuel color is for identification purpose only and is not important to performance or durability of your engine. 3. Be careful. If the tank overflows it might get on your radio gear or on your brakes and it may create an unsafe driving situation. Always keep your fuel bottle closed when not in use. 4. Do not dispose of fuel or empty fuel containers in a fire. It may possibly cause fire or explosion. ENGINE 1. For proper engine break-in procedure, please refer to the manual of your engine. 2. Never run your vehicle without the air filter .If the vehicle will be operated in an area with fine dust, use filter oil or caster oil instead of fuel. It is important that the foam is only moist to trap dirt and allow air passage. With the foam too wet, limited air can pass through; therefore, limiting engine performance. 3. The parts around engine could be dangerously hot after operation. Do not touch it without any protection! RADIO OPERATION 1. When turning radio on, first turn on the transmitter and extend the transmitter antenna. 2. Then, turn on the receiver. When turning off, first turn the receiver off, then the transmitter off. FIRST AID 1. If you drink nitro fuel by accident, immediately drink large quantities of water and try to induce vomiting. Consult with physician right after then. 2. If the nitro fuel gets into your eyes, rinse them well with water. Consult with physician right after then. 3. If the fuel gets onto your skin, wash it well with soap and water. WARNING 1. Improper operations may cause personal and/or property damage. Thunder Tiger and its distributor have no control over damage resulting from shipping, improper construction, or improper usage. 2. Thunder Tiger assumes and accepts no responsibility for personal and/or property damages resulting from the use of improper building materials, equipment and operations. By the act of assembling or operating this product, the user accepts all resulting liability. If the buyer is not prepared to accept this liability, then he/she should return this kit in new, unassembled, and unused condition to the place of purchase.

2008 APRILIA RS125 TECHNICAL SPECIFICATIONS

0

Filed Under (Aprilia) by admin on 06-11-2010

download
specified in the ACU regulations. The appearance from both front, rear and profile of machines must (except when otherwise stated) conform to the homologated shape. The appearance of the exhaust system is excluded from this rule. 2. DISPLACEMENT CAPACITY The displacement must remain at 124.9cc and the bore and stroke (54 x 54.5) must remain as originally produced. 3. MINIMUM WEIGHT The minimum weight at post race control must not be less than 102kg , this includes oil and water but excludes fuel. At any time during the event, the weight of the whole machine (including the tank) must not be less than the minimum weight, with a tolerance of 1kg. 4. NUMBER PLATE COLOURS The background colours and figures for Aprilia Superteens are: FRONT Red background with white numbers – Nitro Newcomers Class White background with black numbers – J&S Championship Class REAR White background with black numbers – Both Classes Placed in accordance with the ACU regulations. 5. CARBURATION INSTRUMENTS Carburation instruments must remain as homologated. Carburettor jets and needles may be replaced. No modification, polishing or cutting is allowed. Only the 28mm bodied standard carburettor is permitted. Electronic or mechanical enriching devices must remain installed and active (If the carburettor is changed from one model to another, the appropriate wiring loom must also be installed and be operative). Bell mouths must be as originally produced by the manufacturer for the homologated machine. Throttle must be standard, quick action throttles are not permitted.
6. FUEL All machines must function on normal unleaded fuel with a maximum lead content of 0.005 g/l (unleaded) and a maximum MON of 90 (RON 102 max) and be readily available from roadside service stations nationwide. 7. FRAME BODY AND REAR SUBFRAME Frame must remain as originally produced by the manufacturer. The sides of the frame body may be covered by a protective part made of composite material. Nothing can be added by welding or removed by machining from the frame body. Engine mounting brackets or plates must remain as originally produced by the manufacturer. Rear sub-frame may be replaced by the later type sub-frame to accept new style bodywork on pre-2006 models, this unit must use the original mounting points. Bolt on accessories to the rear sub-frame may be removed. Front fairing bracket may be altered or replaced on pre-2006 models to accept later bodywork. 8. FRONT FORKS Forks structure (spindle, stanchions, bridges, stem etc) must remain as originally produced by the manufacturer. Standard original internal parts of the forks may be modified. After market damper kits or valves may be installed. The fork caps can be modified or changed to add spring preload/compression and damping adjusters. Dust seals can be modified, changed or removed providing the fork remains totally oil sealed. Any quantity or quality of oil can be used in the front forks. The height and position of the front fork in relation to the fork crowns is free. A steering damper may be added but may not act as a steering lock device. 9. REAR FORK (Swing Arm) Every part of the rear fork must remain as originally produced (including rear fork pivot bolt and rear axle adjuster). Rear wheel stand positioning (support) brackets may be added by welding or bolts. Brackets must have rounded edges viewed from all sides. Fastening screws must be recessed. 10. REAR SUSPENSION UNIT

2010 APRILIA RS125 TECHNICAL SPECIFICATIONS

0

Filed Under (Aprilia) by admin on 06-11-2010

download
1. MACHINES Aprilia RS 125 production models, as produced from 01-11-05 and available in the UK via IN Competition from 01-01-06. (any parts exclusive to the older models including the pre-1999 SP model are not permitted to be used on machines in this series). The only eligible models are designated as Euro 2 & Euro 3 New Euro 2 machines are supplied with race kits included through The machines used are allowed only limited modifications. Most modifications are allowed only on safety and cost control grounds. All motorcycles must comply in every respect with all requirements for Road Racing as specified in the ACU regulations. The appearance from both front, rear and profile of machines must (except when otherwise stated) conform to the homologated shape. The appearance of the exhaust system is excluded from this rule. 2. DISPLACEMENT CAPACITY The displacement must remain at 124.9cc and the bore and stroke (54 x 54.5) must remain as originally produced. 3. MINIMUM WEIGHT The minimum weight at post race control must not be less than 102kg , this includes oil and water but excludes fuel. At any time during the event, the weight of the whole machine (including the tank) must not be less than the minimum weight, with a tolerance of 1kg. 4. NUMBER PLATE COLOURS The background colours and figures for Aprilia Superteens are: FRONT RED background with WHITE numbers – Nitro Newcomers Class BLACK background with WHITE numbers – Aprilia Championship Class REAR BLACK background with WHITE numbers – Both Classes Placed in accordance with the ACU regulations. 5. CARBURATION INSTRUMENTS Carburation instruments must remain as homologated. Carburettor jets and needles may be replaced. No modification, polishing or cutting is allowed. Only the 28mm bodied standard carburettor is permitted. Electronic or mechanical enriching devices must remain installed and active (If the carburettor is changed from one model to another, the appropriate wiring loom must also be installed and be operative). Bell mouths must be as originally produced by the manufacturer for the homologated machine. Throttle must be standard, quick action throttles are not permitted. 6. FUEL All machines must function on normal unleaded fuel with a maximum lead content of 0.005 g/l (unleaded) and a maximum MON of 90 (RON 102 max) and be readily available from roadside service stations nationwide. E85 Bio Fuel is also permitted when purchased from normal roadside outlets.

Yamaha XVS 650 SPECIFICATIONS AND OWNER'S MANUAL

0

Filed Under (Yamaha) by admin on 07-11-2010

download
Brake lever The brake lever is located at the right handlebar grip. To apply the front brake, pull the lever toward the handlebar grip. 1. Brake lever INSTRUMENT AND CONTROL FUNCTIONS 3 NOTE: The fuel tank cap cannot be installed unless the key is in the lock. In addition, the key cannot be removed if the cap is not properly installed and locked. WARNING Make sure that the fuel tank cap is properly installed before riding. knocking (or pinging) occurs, use a gasoline of a different brand or premium unleaded fuel. Use of unleaded fuel will extend spark plug life and reduce maintenance costs. Gasohol There are two types of gasohol: gasohol containing ethanol and that containing methanol. Gasohol containing ethanol can be used if the ethanol content does not exceed 10%. Gasohol containing methanol is not recommended by Yamaha because it can cause damage to the fuel system or vehicle performance problems. INSTRUMENT AND CONTROL FUNCTIONS 3 ON With the fuel cock lever in this position, fuel flows to the carburetors. Turn the fuel cock lever to this position when starting the engine and riding. RES 1. Arrow mark positioned over “ON” 1. Arrow mark positioned over “RES” Seats (XVS650) Passenger seat To remove the passenger seat Remove the nut, and then pull the passenger seat up. To install the passenger seat Insert the projection on the front of the passenger seat into the seat holder as shown, place the seat in the original position, and then install the nut. 1. Nut INSTRUMENT AND CONTROL FUNCTIONS 3 Seats (XVS650A/AT) Passenger seat To remove the passenger seat Remove the bolt, and then pull the passenger seat up. To install the passenger seat Insert the projections on the front of the passenger seat into the holders as shown, place the seat in the original position, and then install the bolt. 1. Bolt Helmet holder To open the helmet holder, insert the key into the lock, and then turn the key as shown. To lock the helmet holder, place it in the original position, and then remove the key

YAMAHA PW 50Y SPECIFICATION AND OWNER'S MANUAL

0

Filed Under (Yamaha) by admin on 19-11-2010

download
Rear brake lever The rear brake lever is located on the left handlebar grip. To apply the rear brake, pull this lever toward the handlebar grip. EAU13182 Fuel tank cap To remove the fuel tank cap, turn it counterclockwise, and then pull it off. To install the fuel tank cap, insert it into the tank opening, and then turn it clock- wise. WARNING EWA11091 Make sure that the fuel tank cap is properly closed after filling fuel. Leaking fuel is a fire hazard. EAU13221 Fuel Make sure there is sufficient gasoline in the tank. WARNING EWA10881 Gasoline and gasoline vapors are extremely flammable. To avoid fires and explosions and to reduce the risk of injury when refueling, follow these instructions. 1. Before refueling, turn off the engine and be sure that no one is sitting on the vehicle. Never refuel while smoking, or while in the vicinity of sparks, open flames, or other sources of ignition such as the pilot lights of water heaters and clothes dryers. 2. Do not overfill the fuel tank. When refueling, be sure to insert the pump nozzle into the fuel tank filler hole. Stop filling when the fuel reaches the bottom of the filler tube. Because fuel expands when it heats up, heat from the engine or the sun can cause fuel to spill out of the fuel tank. Your Yamaha engine has been designed to use regular unleaded gasoline with a pump octane number [(R+M)/2] of 86 or higher, or a research octane number of 91 or higher. If knocking (or pinging) occurs, use a gasoline of a different brand or premium unleaded fuel. Use of unleaded fuel will extend spark plug life and reduce maintenance costs. Gasohol There are two types of gasohol: gasohol containing ethanol and that containing methanol. Gasohol containing ethanol can be used if the ethanol content does not exceed 10% (E10). Gasohol containing methanol is not recommended by Yamaha because it can cause damage to the fuel system or vehicle performance problems

2004 KTM 950 ADVENTURE REPAIR MANUAL

0

Filed Under (KTM) by admin on 23-11-2010

download
Intake system Fresh air is drawn into the filter box through the intake snorkel 1 , past the carburetors 2 and through the air filter 3 . The cleaned air is conducted to the combustion chamber through the carburetors and intake ports. 1 2 2 3 2-4 Repair manual KTM LC8 Art.-Nr . 3.206.016-E Secondary air system The secondary air system supplies fresh air to the emissions in the exhaust port, resulting in the afterburning (oxidation) of the emissions. A line leads from the filter box 1 to the control valve 2 which opens as soon as the throttle valves 3 are opened. The line continues to the reed valves 4 in the cylinder heads which are actuated by the pressure pulsation in the exhaust system. As a result, cleansed fresh air arrives in the exhaust port. The oxygen content in the air and the high exhaust gas temperature cause the emissions to oxidize. If the throttle valves are closed and the engine goes into an overrun condition, the underpressure in the intake port will rise and the control valve will close. This prevents exhaust backfire (combustion of the unburned fuel/air mixture). 1 2 3 3 4 4 4 2-5 Closed thermostat The thermostat is closed if the temperature of the cooling liquid drops below 75°C. The water pump 1 pumps the cooling liquid through the cylinder and cylinder heads 2 and the thermostat 2 . Open thermostat The thermostat 3 opens at 75°C. The water pump 1 pumps the cooling liquid through the cylinder and cylinder heads 2 , the aluminum cooler 4 and the thermostat. The pressure in the cooling system (max. 1.4 bar) is regulated by a valve in the radiator cap 5 . The cooling liquid level in the compensating tank 6 must be between the MIN and MAX marks when the engine is cold. The fan 7 switches on at 102°C.

2009 APRILIA RS125 TECHNICAL SPECIFICATIONS

0

Filed Under (Aprilia) by admin on 06-11-2010

download
1. MACHINES Aprilia RS 125 production models, as produced from 01-11-05 and available in the UK via IN Competition from 01-01-06. (any parts exclusive to the older models including the pre-1999 SP model are not permitted to be used on machines in this series). The only eligible models are designated as Euro 2 & Euro 3 New machines are supplied with race kits included through: IN Competition Unit 1 New Lane Burscough Lancs 2. DISPLACEMENT CAPACITY The displacement must remain at 124.9cc and the bore and stroke (54 x 54.5) must remain as originally produced. 3. MINIMUM WEIGHT The minimum weight at post race control must not be less than 102kg , this includes oil and water but excludes fuel. At any time during the event, the weight of the whole machine (including the tank) must not be less than the minimum weight, with a tolerance of 1kg. 4. NUMBER PLATE COLOURS The background colours and figures for Aprilia Superteens are: FRONT RED background with WHITE numbers – Nitro Newcomers Class BLACK background with WHITE numbers – Aprilia Championship Class REAR BLACK background with WHITE numbers – Both Classes Placed in accordance with the ACU regulations. 5. CARBURATION INSTRUMENTS Carburation instruments must remain as homologated. Carburettor jets and needles may be replaced. No modification, polishing or cutting is allowed. Only the 28mm bodied standard carburettor is permitted. Electronic or mechanical enriching devices must remain installed and active (If the carburettor is changed from one model to another, the appropriate wiring loom must also be installed and be operative). Bell mouths must be as originally produced by the manufacturer for the homologated machine. Throttle must be standard, quick action throttles are not permitted.
6. FUEL All machines must function on normal unleaded fuel with a maximum lead content of 0.005 g/l (unleaded) and a maximum MON of 90 (RON 102 max) and be readily available from roadside service stations nationwide. E85 Bio Fuel is also permitted when purchased from normal roadside outlets. 7. FRAME BODY AND REAR SUBFRAME Frame must remain as originally produced by the manufacturer and may not be painted. The sides of the frame body may be covered by a protective part made of composite material of the original frame colour. Nothing can be added by welding or removed by machining from the frame body. Engine mounting brackets or plates must remain as originally produced by the manufacturer. Bolt on accessories to the rear sub-frame may be removed. 8. FRONT FORKS Forks structure (spindle, stanchions, bridges, stem etc) must remain as originally produced by the manufacturer. Standard original internal parts of the forks may be modified. After market damper kits or valves may be installed. The fork caps can be modified or changed to add spring preload/compression and damping adjusters. Dust seals can be modified, changed or removed providing the fork remains totally oil sealed. Any quantity or quality of oil can be used in the front forks. The height and position of the front fork in relation to the fork crowns is free. A steering damper may be added but may not act as a steering lock device. 9. REAR FORK (Swing Arm)

BMW Motorcycles K-Models Maintenance Schedule

0

Filed Under (BMW) by admin on 12-11-2010

download
Check operation of sidestand switch (angle); orretracting sidestand linkage (K75′s) Apply silicone sprayto guide rods of adjustable windshield (onlyK1100LT, K75RT) Check torque at the bolts and nuts: • engine to frame • suspension strut mounts • side&centerstand pivot • rearwheel studs • front axle studs, clamp bolts, brake calipermounting bolts Final Inspection with Safety/ Operating check: • Condition of tires and wheels • Lights, horn, and signal system • Telltale and warning lights • Clutch and gearshift • Steering, hand & footbrake, ABS • Instruments (including optional accessories, radio, etc.) • Check &adjust engine idle speed • Check and adjust CO content of exhuast (models with closed loop catclyic con verters • Test ride, visual qualitycheck