2011 HONDA CRF250X Specifications


Filed Under (Honda) by admin on 18-02-2011

Specifications CRF250X (ED-type) ENGINE Type Liquid-cooled 4-stroke 4-valve SOHC single Displacement 249cm 3 Bore  Stroke 78  52.2mm Compression Ratio 12.9 : 1 Max. Power Output 21.9kW/9,000min -1 (95/1/EC) Max. Torque 24.2kW/8,000min -1 (95/1/EC) FUEL SYSTEM Carburation 37mm Keihin FCR flat slide carburettor with throttle position sensor (TPS) Fuel Tank Capacity 7.3 litres (including 1.6-litre reserve) ELECTRICAL SYSTEM Ignition System Computer-controlled digital capacitor discharge with electronic advance and lighting coil Starter Electric / Primary kick DRIVETRAIN Transmission 5-speed Primary Reduction 3.611 (65/18) Gear Ratios 1 2.384 (31/13) 2 1.750 (28/16) 3 1.333 (28/21) 4 1.041 (25/24) 5 0.814 (22/27) Final Reduction 3.786 (53/14) Final Drive #520 T-ring roller chain FRAME Type Semi-double cradle; aluminium twin-spar CHASSIS Dimensions (LxWxH) 2,174 x 827 x 1,261mm Wheelbase 1,481mm Caster Angle 27˚ 54′ Trail 118mm Seat Height 958mm Press information for 2011 CRF250X 3 EU-EN Ground Clearance 346mm Kerb Weight 115kg SUSPENSION Type Front 47mm inverted Showa leading-axle twin- chamber cartridge-type telescopic fork with 16-step adjustable compression and rebound damping; 280mm axle travel Rear Pro-Link with single Showa damper, adjustable low-speed (13-step) & high-speed (3.5-turn) compression and 17-step rebound damping; 313mm axle travel WHEELS Type Front Aluminium rim/wire spoke Rear Aluminium rim/wire spoke Rim Size Front 21 x 1.60 Rear 18 x 2.15 Tyre Size Front 90/90-21 M/C 54R Rear 120/90-18 M/C 65R BRAKES Type Front 240  3mm hydraulic disc with dual-piston caliper and sintered metal pads Rear 240  4mm hydraulic disc with single-piston caliper and sintered metal pads

Comments are closed.